FAG 7301-B-TVP-UA Angular Contact Ball Bearings

a:32 mm; r1s (min):1.5 mm; Dynamic (Ca):92.6 kN; C:18 mm; r2s (min):0.6 mm; Pu:12.680 kN; T:27.25 mm; Static (Coa):104 kN; rs (min):2 mm; B:25 mm;

N:21 mm; J6:146 mm; Basic static load rating C0:15.3 kN; A5:22 mm; Hexagonal key size for grub screw N:3 mm; d:35 mm; Fatigue load limit Pu:0.655 kN; Basic dynamic load rating C:25.5 kN; N1:14 mm; H:93 mm;

Limiting speed:1500 r/min; Recommended tightening torque for grub screw:4.2 N·m; L:70 mm; End cover:ECY 205; Mass bearing unit:0.58 kg; Recommended diameter for attachment bolts, mm G:10 mm; Housing material:Cast iron; Rα:45 °; A:30 mm; T:40 mm;

B:20 mm; d1:190 mm; Mass shaft washer:3.45 kg; d:90 mm; r1,2 min.:2.1 mm;

Oil Speed Rating n2:4300 rpm; Basic Dynamic Radial Load Rating C:95600 N; Grease Speed Rating n1:3200 rpm; Accessories:Two Shields & Snap-R; d:75.000 mm; Basic Static Radial Load Rating Co:88000 N; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; B:41.30 mm; D:130.0000 mm;

Mass bearing:0.053 kg; E:29 mm; D:35 mm; C:17 mm; Da:29.5 mm; ra max.:0.3 mm; Reference speed:16000 r/min; da:28.4 mm; Limiting speed:18000 r/min; r1,2 min.:0.3 mm;

Static axial stiffness, preload class A:392 N/µm; Static axial stiffness, preload class C:677 N/µm; Calculation factor e:0.68; Fatigue load limit Pu:4.9 kN; D1:178.4 mm; Calculation factor (single, tandem) Y0:0.38; C2:6.6 mm; Calculation factor f2C:1.05; ra max.:2 mm; Preload class B GB:

Grease Speed Rating n1:6000 rpm; B:27.00 mm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:37700 N; Oil Speed Rating n2:8000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:27500 N; d:35.000 mm; Accessories:No Shield, no Seal; D:72.0000 mm;

N4:4 mm; Hexagonal key size for grub screw N:3.969 mm; A5:20 mm; A:40 mm; A1:25 mm; Thread grub screw G2:5/16-24 UNF; Recommended diameter for attachment bolts, inch G:0.5 in; Mass bearing unit:1.1 kg; J7:14 mm; Limiting speed:1200 r/min;

Lock washer:W 15; H1:82.55 mm; Stabilizing ring:SR-15-0; Cap bolt, SAE grade:5; db:87.313 mm; Cap bolt:2 x 1/2-13 UNC; N1:15.875 mm; J1:47.625 mm; Cap bolt recommended tightening torque:81.3 N·m; L:285.75 mm;

da:190.5 mm; Ca:117.805 mm; Taconite seal:TER 584; P180°:285 kN; A2:368.3 mm; Housing:SSAFS 544; Max. speed for Taconite seal:385 r/min; PG:1/4 NPT; P150°:236 kN; A1:222.25 mm;

ra max.:10 mm; Da max.:1312 mm; B2 ≈:600 mm; Calculation factor Y1:1.9; K:12 mm; Mass bearing + sleeve:3050 kg; Calculation factor Y0:1.8; D1 ≈:1182 mm; B:500 mm; da min.:882 mm;

Limiting speed:850 r/min; B:300 mm; r1,2 min.:7.5 mm; Calculation factor kr:0.34; Basic dynamic load rating C:6440 kN; D1 ≈:672 mm; F:537 mm; db min.:542 mm; ra max.:6 mm; Basic static load rating C0:12900 kN;

Calculation factor f2A:1; Calculation factor (back-to-back, face-to-face) Y1:0.92; a:18.4 mm; d:35 mm; Db max.:57.8 mm; Ball diameter Dw:7.144 mm; Basic dynamic load rating C:11.1 kN; Preload class A GA:100 N; d2:41.6 mm; Calculation factor f1:0.99;

da max.:36.2 mm; r1 min.:0.6 mm; dk:45.593 mm; Specific static load factor K0:300 N/mm²; Material constant KM:330; Mass plain bearing:0.23 kg; C:23.8 mm; B:27.762 mm; Basic static load rating C0:260 kN; Design (sliding contact surface combination):Steel/steel, heavy-d;