Home>Products>IPTCI Bearing>1.181 Inch | 30 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.689 Inch | 42.9 Millimeter IPTCI HUCPA 206 30MM Pillow Block Bearings
IPTCI HUCPA 206 30MM MODELS
Need a CAD or 3D Model?
1.181 Inch | 30 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.689 Inch | 42.9 Millimeter IPTCI HUCPA 206 30MM Pillow Block Bearings
IPTCI Bearing
IPTCI HUCPA 206 30MM SPECIFICATIONS
Various IPTCI Bearing types and Ball Type sizes BEARING CORP. to accommodate your 1.181 Inch | 30 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.689 Inch | 42.9 Millimeter IPTCI HUCPA 206 30MM Pillow Block Bearings 1.181 Inch | 30 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.689 Inch | 42.9 Millimeter requirements. Steel Inner/Outer Ring Material
- IPTCI
HUCPA 206 30MM
- Angular Contact Ball Bearings
- 0.0
- N/A
- 0.579
- B00152
- 2 Seals
- No
- Ball Bearing
- BEARING CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
1.181 Inch | 30 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.689 Inch | 42.9 Millimeter IPTCI HUCPA 206 30MM Pillow Block BearingsSpecifications
- Double Row
- ABEC 1 | ISO P0
- No
- No
- Steel
- 25 Degree
- CS-Special
- 1 (Single)
- Metric
- 30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; CS-Special; Steel Cage; 25 Degree; 1 (Singl
- Fluorinated Elastomer Friction Seal
- Angular Contact Ball Bearing
- 31171531
- 8482.10.50.28
- Bearing
- Angular Contact
- 1.189 Inch | 30.2 Millimeter
- 1.181 Inch | 30 Millimeter
- 2.835 Inch | 72 Millimeter
IPTCI HUCPA 206 30MM 1.181 Inch | 30 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.689 Inch | 42.9 Millimeter IPTCI HUCPA 206 30MM Pillow Block BearingsProduct description
##1.181 Inch | 30 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.689 Inch | 42.9 Millimeter IPTCI HUCPA 206 30MM Pillow Block BearingsParts Table 1## | ||||||||
---|---|---|---|---|---|---|---|---|
Block Springs | 100 mm | 150 mm | 1,15 Kg | N/A | ||||
The Ball Hinge Spring | 55 mm | 100 mm | 0,773 Kg | N/A | ||||
Snap Ring | 20 | 26,0 | 0,0145 Kg | 168 mm | ||||
Shafts | 100MM Bore; 150MM Outside Diameter; 24MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Steel Cage | 50000 | 0.984 | N/A | ||||
Cylinder Block | 1.25 Inch | 31.75 Millimeter | 2.016 Inch | 51.2 Millimeter | 0.91 | N/A | ||||
Pressure Plate | 1.5 Inch | 38.1 Millimeter | 3.25 Inch | 82.55 Millimeter | 0.434 | N/A | ||||
The Thrust Plate | 1.375 Inch | 34.925 Millimeter | 1.375 Inch | 34.925 Millimeter | 1.493 | N/A | ||||
Pump Right Rotating Group | 3/8 in | 1/2 in | 0,0145 Kg | 1.5 mm | ||||
Seal Kit For Hyd Pump | 0.6250 in | 0.6250 in | CN | LS-13-ZZ P/6 | ||||
Valve Plates | 0.08 lbs | 0 Inch | 0 Millimeter | 3.937 Inch | 100 Millimeter | 222,25 | ||||
Cylinder Blocks | 107,95 mm | 222,25 mm | High Carbon Chrome Steel | None | ||||
Swash Plate Assy | High Carbon Chrome Steel | 8.17 Hz | 8.17 Hz | Ball | ||||
Cylinder | 140 mm | 300 mm | 222,25 mm | 1.375 Inch | 34.925 Millimeter | ||||
Set Plate | 24.020 | 1.493 | 0.08 lbs | 100 |
1.25 Inch | 31.75 Millimeter x 1.689 Inch | 42.9 Millimeter x 1.875 Inch | 47.63 Millimeter IPTCI SUCTP 207 20 N Pillow Block Bearings | Drive Speed:Angular Contact Ball Bearings; Maximum Permissible Pilot Pressure:0.0; Maximum angular acceleration:NTN; Power:N/A; Moment of inertia rotary group:0.579; Determining Operating Characteristics:B00152; Maximum Volume Flow:2 Seals; Control Pressure Measurement:No; Rate Of Pressure Change:Ball Bearing; Case volume:Double Row; Torque:ABEC 1 | ISO P0; Drive Power:No; Voltage:No; Displacement, geometric, per revolution:Steel; Load Pressure:25 Degree; Pressurefree Operation:CS-Special; Pilot Pressure:1 (Single); Control Fluid Drain:Metric; Maximum Axial Force At Standstill:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Weight (approx.):Fluorinated Elastomer Friction Seal; Maximum rotational speed:Angular Contact Ball Bearing; Maximum Torque:31171531; Flow:8482.10.50.28; Sequence Valve:Bearing; Maximum Permissible Speed (limit Speed):Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
IPTCI SNASFCS 210 32 Flange Block Bearings | Drive Speed:Angular Contact Ball Bearings; Pressurefree Operation:0.0; Nominal Resistance:NTN; Rotary stiffness:N/A; Rate Of Pressure Change:0.579; Load Pressure:B00152; Maximum Permissible Pilot Pressure:2 Seals; Power:No; Voltage:Ball Bearing; Torque:Double Row; Control Pressure Measurement:ABEC 1 | ISO P0; Maximum Axial Force At Standstill:No; Maximum angular acceleration:No; Weight (approx.):Steel; Maximum Torque:25 Degree; Control Fluid Drain:CS-Special; Pilot Pressure:1 (Single); Maximum Permissible Speed (limit Speed):Metric; Flow:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Maximum Volume Flow:Fluorinated Elastomer Friction Seal; Determining Operating Characteristics:Angular Contact Ball Bearing; Drive Power:31171531; Moment of inertia rotary group:8482.10.50.28; Maximum rotational speed:Bearing; Sequence Valve:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
IPTCI NAT 206 17 Take Up Unit Bearings | Torque:Angular Contact Ball Bearings; Displacement, geometric, per revolution:0.0; Maximum Permissible Pilot Pressure:NTN; Maximum Volume Flow:N/A; Sequence Valve:0.579; Determining Operating Characteristics:B00152; Pilot Pressure:2 Seals; Rotary stiffness:No; Pressurefree Operation:Ball Bearing; Maximum Torque:Double Row; Rate Of Pressure Change:ABEC 1 | ISO P0; Control Fluid Drain:No; Drive Speed:No; Maximum Axial Force At Standstill:Steel; Drive Power:25 Degree; Weight (approx.):CS-Special; Maximum angular acceleration:1 (Single); Voltage:Metric; Power:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Flow:Fluorinated Elastomer Friction Seal; Control Pressure Measurement:Angular Contact Ball Bearing; Load Pressure:31171531; Nominal Resistance:8482.10.50.28; Moment of inertia rotary group:Bearing; Case volume:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
1 Inch | 25.4 Millimeter x 1.339 Inch | 34 Millimeter x 1.438 Inch | 36.525 Millimeter IPTCI HUCNPPA 205 16 Pillow Block Bearings | Drive Power:Angular Contact Ball Bearings; Displacement, geometric, per revolution:0.0; Drive Speed:NTN; Control Pressure Measurement:N/A; Rotary stiffness:0.579; Case volume:B00152; Voltage:2 Seals; Control Fluid Drain:No; Torque:Ball Bearing; Flow:Double Row; Pressurefree Operation:ABEC 1 | ISO P0; Moment of inertia rotary group:No; Maximum angular acceleration:No; Maximum rotational speed:Steel; Load Pressure:25 Degree; Maximum Volume Flow:CS-Special; Weight (approx.):1 (Single); Maximum Permissible Speed (limit Speed):Metric; Determining Operating Characteristics:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Maximum Torque:Fluorinated Elastomer Friction Seal; Maximum Permissible Pilot Pressure:Angular Contact Ball Bearing; Pilot Pressure:31171531; Power:8482.10.50.28; Nominal Resistance:Bearing; Maximum Axial Force At Standstill:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
IPTCI SUCTFB 206 30MM L3 Flange Block Bearings | Control Fluid Drain:Angular Contact Ball Bearings; Torque:0.0; Maximum Volume Flow:NTN; Maximum angular acceleration:N/A; Rate Of Pressure Change:0.579; Drive Power:B00152; Moment of inertia rotary group:2 Seals; Load Pressure:No; Drive Speed:Ball Bearing; Case volume:Double Row; Maximum Permissible Speed (limit Speed):ABEC 1 | ISO P0; Displacement, geometric, per revolution:No; Rotary stiffness:No; Control Pressure Measurement:Steel; Maximum rotational speed:25 Degree; Sequence Valve:CS-Special; Determining Operating Characteristics:1 (Single); Maximum Torque:Metric; Maximum Permissible Pilot Pressure:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Pilot Pressure:Fluorinated Elastomer Friction Seal; Weight (approx.):Angular Contact Ball Bearing; Pressurefree Operation:31171531; Maximum Axial Force At Standstill:8482.10.50.28; Power:Bearing; Flow:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
1.378 Inch | 35 Millimeter x 1.689 Inch | 42.9 Millimeter x 1.874 Inch | 47.6 Millimeter IPTCI UCP 207 35MM L3 Pillow Block Bearings | Drive Power:Angular Contact Ball Bearings; Maximum Axial Force At Standstill:0.0; Voltage:NTN; Maximum Volume Flow:N/A; Case volume:0.579; Drive Speed:B00152; Rotary stiffness:2 Seals; Maximum angular acceleration:No; Nominal Resistance:Ball Bearing; Pressurefree Operation:Double Row; Rate Of Pressure Change:ABEC 1 | ISO P0; Displacement, geometric, per revolution:No; Weight (approx.):No; Power:Steel; Flow:25 Degree; Sequence Valve:CS-Special; Pilot Pressure:1 (Single); Control Pressure Measurement:Metric; Maximum rotational speed:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Maximum Permissible Speed (limit Speed):Fluorinated Elastomer Friction Seal; Torque:Angular Contact Ball Bearing; Load Pressure:31171531; Maximum Torque:8482.10.50.28; Determining Operating Characteristics:Bearing; Control Fluid Drain:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
IPTCI SUCNPFCS 211 32 Flange Block Bearings | Maximum Axial Force At Standstill:Angular Contact Ball Bearings; Control Pressure Measurement:0.0; Moment of inertia rotary group:NTN; Maximum rotational speed:N/A; Power:0.579; Flow:B00152; Maximum Volume Flow:2 Seals; Sequence Valve:No; Maximum Torque:Ball Bearing; Weight (approx.):Double Row; Torque:ABEC 1 | ISO P0; Maximum Permissible Pilot Pressure:No; Pressurefree Operation:No; Voltage:Steel; Case volume:25 Degree; Maximum Permissible Speed (limit Speed):CS-Special; Rate Of Pressure Change:1 (Single); Determining Operating Characteristics:Metric; Maximum angular acceleration:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Control Fluid Drain:Fluorinated Elastomer Friction Seal; Nominal Resistance:Angular Contact Ball Bearing; Pilot Pressure:31171531; Load Pressure:8482.10.50.28; Drive Power:Bearing; Drive Speed:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
IPTCI BUCNPFL 202 10 Flange Block Bearings | Displacement, geometric, per revolution:Angular Contact Ball Bearings; Maximum Axial Force At Standstill:0.0; Pilot Pressure:NTN; Rate Of Pressure Change:N/A; Torque:0.579; Maximum Volume Flow:B00152; Load Pressure:2 Seals; Flow:No; Sequence Valve:Ball Bearing; Maximum Permissible Pilot Pressure:Double Row; Voltage:ABEC 1 | ISO P0; Control Pressure Measurement:No; Maximum Torque:No; Maximum rotational speed:Steel; Maximum angular acceleration:25 Degree; Case volume:CS-Special; Control Fluid Drain:1 (Single); Maximum Permissible Speed (limit Speed):Metric; Nominal Resistance:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Moment of inertia rotary group:Fluorinated Elastomer Friction Seal; Drive Speed:Angular Contact Ball Bearing; Determining Operating Characteristics:31171531; Power:8482.10.50.28; Pressurefree Operation:Bearing; Drive Power:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
IPTCI HUCNPF 206 30MM Flange Block Bearings | Nominal Resistance:Angular Contact Ball Bearings; Maximum Axial Force At Standstill:0.0; Load Pressure:NTN; Voltage:N/A; Maximum Torque:0.579; Torque:B00152; Power:2 Seals; Determining Operating Characteristics:No; Rate Of Pressure Change:Ball Bearing; Flow:Double Row; Pilot Pressure:ABEC 1 | ISO P0; Control Pressure Measurement:No; Maximum Permissible Speed (limit Speed):No; Moment of inertia rotary group:Steel; Pressurefree Operation:25 Degree; Maximum Volume Flow:CS-Special; Maximum rotational speed:1 (Single); Control Fluid Drain:Metric; Drive Power:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Sequence Valve:Fluorinated Elastomer Friction Seal; Rotary stiffness:Angular Contact Ball Bearing; Case volume:31171531; Weight (approx.):8482.10.50.28; Drive Speed:Bearing; Maximum Permissible Pilot Pressure:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
2 Inch | 50.8 Millimeter x 2.189 Inch | 55.6 Millimeter x 2.5 Inch | 63.5 Millimeter IPTCI UCP 211 32 Pillow Block Bearings | Control Pressure Measurement:Angular Contact Ball Bearings; Maximum Permissible Pilot Pressure:0.0; Pilot Pressure:NTN; Voltage:N/A; Case volume:0.579; Drive Speed:B00152; Drive Power:2 Seals; Torque:No; Maximum Permissible Speed (limit Speed):Ball Bearing; Weight (approx.):Double Row; Flow:ABEC 1 | ISO P0; Maximum rotational speed:No; Load Pressure:No; Maximum Volume Flow:Steel; Rate Of Pressure Change:25 Degree; Maximum Torque:CS-Special; Nominal Resistance:1 (Single); Pressurefree Operation:Metric; Maximum angular acceleration:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Maximum Axial Force At Standstill:Fluorinated Elastomer Friction Seal; Control Fluid Drain:Angular Contact Ball Bearing; Moment of inertia rotary group:31171531; Determining Operating Characteristics:8482.10.50.28; Sequence Valve:Bearing; Rotary stiffness:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
1.25 Inch | 31.75 Millimeter x 1.902 Inch | 48.3 Millimeter x 1.688 Inch | 42.875 Millimeter IPTCI NAPA 206 20 Pillow Block Bearings | Rate Of Pressure Change:Angular Contact Ball Bearings; Power:0.0; Voltage:NTN; Maximum angular acceleration:N/A; Pilot Pressure:0.579; Drive Power:B00152; Drive Speed:2 Seals; Maximum Torque:No; Case volume:Ball Bearing; Displacement, geometric, per revolution:Double Row; Determining Operating Characteristics:ABEC 1 | ISO P0; Torque:No; Moment of inertia rotary group:No; Weight (approx.):Steel; Maximum Axial Force At Standstill:25 Degree; Control Pressure Measurement:CS-Special; Load Pressure:1 (Single); Pressurefree Operation:Metric; Flow:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Maximum Permissible Speed (limit Speed):Fluorinated Elastomer Friction Seal; Sequence Valve:Angular Contact Ball Bearing; Maximum rotational speed:31171531; Maximum Permissible Pilot Pressure:8482.10.50.28; Rotary stiffness:Bearing; Nominal Resistance:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
0.625 Inch | 15.875 Millimeter x 1.221 Inch | 31.013 Millimeter x 1.313 Inch | 33.35 Millimeter IPTCI BUCTP 202 10 Pillow Block Bearings | Determining Operating Characteristics:Angular Contact Ball Bearings; Rotary stiffness:0.0; Weight (approx.):NTN; Pilot Pressure:N/A; Maximum Torque:0.579; Drive Speed:B00152; Voltage:2 Seals; Pressurefree Operation:No; Sequence Valve:Ball Bearing; Maximum Permissible Speed (limit Speed):Double Row; Torque:ABEC 1 | ISO P0; Control Pressure Measurement:No; Maximum angular acceleration:No; Rate Of Pressure Change:Steel; Control Fluid Drain:25 Degree; Displacement, geometric, per revolution:CS-Special; Maximum Permissible Pilot Pressure:1 (Single); Drive Power:Metric; Case volume:30MM Bore; 72MM Outside Diameter; 30.2MM Width; 2 Seals; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 |; Nominal Resistance:Fluorinated Elastomer Friction Seal; Flow:Angular Contact Ball Bearing; Maximum Volume Flow:31171531; Maximum rotational speed:8482.10.50.28; Load Pressure:Bearing; Maximum Axial Force At Standstill:Angular Contact; B:1.189 Inch | 30.2 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.835 Inch | 72 Millimeter; |
1.181 Inch | 30 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.689 Inch | 42.9 Millimeter IPTCI HUCPA 206 30MM Pillow Block Bearings Video
Contact Us
- BEARING CORP.
- Address1600 E. Bishop Court, P.O. Box 7604,Mount Prospect, IL 60056-7604, U.S.A.
- Phone(Working Time)294-2659
IPTCI HUCPA 206 30MM Technical Articles
8x19x12 bearing size catalogue |
85x150x49.2 bearing price list |
75x160x58 bearing number and size chart pdf |
IPTCI Bearing CATEGORIES
- REXROTH Piston Pump 18 Displacement
- REXROTH Piston Pump 28 Displacement
- REXROTH Piston Pump 100 Displacement
- REXROTH Piston Pump 140 Displacement
- REXROTH Piston Pump
- REXROTH Hand-Directional Valve
- REXROTH Check Valve
- REXROTH Compensated Flow Control Valve
- FAG Bearing
- NTN Bearing
- SKF Bearing
- Timken Bearing
- AMI Bearing
- CONSOLIDATED BEARING
- DODGE Bearing
- IPTCI Bearing
- REXROTH Directional poppet valves
- REXROTH Throttle check valve
- REXROTH Pressure reducing valve
- REXROTH Directional spool valves
- REXROTH Throttle valves
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Twin throttle check valve
- REXROTH Check valves
- lgem 2 Bearing
- nu 309 Bearing
- skf hmsa10 Bearing
- skf e2 Bearing
Customers Who Viewed IPTCI HUCPA 206 30MM Also Viewed
- 1.378 Inch | 35 Millimeter x 1.689 Inch | 42.9 Millimeter x 1.874 Inch | 47.6 Millimeter IPTCI UCP 207 35MM L3 Pillow Block Bearings
- 1.25 Inch | 31.75 Millimeter x 1.902 Inch | 48.3 Millimeter x 1.688 Inch | 42.875 Millimeter IPTCI NAPA 206 20 Pillow Block Bearings
- 2 Inch | 50.8 Millimeter x 2.189 Inch | 55.6 Millimeter x 2.5 Inch | 63.5 Millimeter IPTCI UCP 211 32 Pillow Block Bearings
- 1 Inch | 25.4 Millimeter x 1.339 Inch | 34 Millimeter x 1.438 Inch | 36.525 Millimeter IPTCI SUCSP 205 16 Pillow Block Bearings
- 1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.688 Inch | 42.875 Millimeter IPTCI UCPA 206 20 Pillow Block Bearings